柴油發電機組轉速測量保護系統的工作原理：

　　轉速是柴油發電機設備中最基本、最重要的參數之一，起動時的點火轉速、運行中的轉速調整、超速時的停車保護、甚至負荷的大小也能從轉速的大小上得到體現，因此轉速測定是柴油發電機監控保護的基礎。一般柴油機中轉速的測量有二處，一是主機轉速的測量，二是渦輪增壓器轉速的測量。

　?。?/span>1） 傳感器。傳感器是一個近程感應開關，不通過接觸就可以工作。它由振蕩器、觸發器及放大器組成，通過振蕩器電路線圈產生一交變電磁場。在金屬導體接近傳感器時交變磁場就會發生變化，振蕩器的輸出電壓隨之發生變化，頻率也發生變化。主機轉速測量的傳感器共有4個。2個測量轉速并經速度變送器在CMR盤或OCW盤顯示轉速，另外2個供調速器使用。

　　（2） 速度變送器。將傳感器傳輸來的頻率信號轉換成4～20 mA的電流信號，傳送給轉速表。

　?。?/span>3） 轉速表。顯示轉速。

The working principle of the speed measurement and protection system for diesel generator sets:

Speed is one of the most basic and important parameters in diesel generator equipment. The ignition speed during start-up, speed adjustment during operation, parking protection during overspeed, and even the size of the load can also be reflected from the speed. Therefore, speed measurement is the basis of diesel generator monitoring and protection. There are two ways to measure the rotational speed in a typical diesel engine: one is to measure the engine speed, and the other is to measure the turbocharger speed.

(1) Sensors. The sensor is a proximity sensing switch that can operate without contact. It consists of an oscillator, a trigger, and an amplifier, which generate an alternating electromagnetic field through the oscillator circuit coil. When a metal conductor approaches the sensor, the alternating magnetic field will change, and the output voltage of the oscillator will also change, along with the frequency. There are a total of 4 sensors for measuring the speed of the host. Two measure the speed and display it on the CMR or OCW panel through the speed transmitter, while the other two are used for the speed controller.

(2) Speed transmitter. Convert the frequency signal transmitted by the sensor into a 4-20 mA current signal and transmit it to the tachometer.

(3) Tachometer. Display the rotational speed.